2006-2007 Honda Civic 2/ 4-Door Uneven or Rapid Rear Tire Wear
download NOTE: To ensure a proper repair and proper reimbursement, you must read this entire service bulletin before doing any work. SYMPTOM The customer may complain of uneven or rapid rear tire wear,...
View Article2007 HONDA PILOT EXHAUST PIPE FINISHERS INSTALLATION INSTRUCTIONS
download TOOLS REQUIRED 10 mm Socket Torque wrench Rubber mallet 2 Exhaust pipe finishers 3. While pushing the exhaust pipe finisher firmly against the exhaust pipe, tighten the flange bolt. Torque the...
View Article2005-2008 4.6L Ford Mustang GT Catalyzed Power-X crossover pipe Installation...
download Installation instructions: 1.) Raise and support vehicle. 2.) Install Bassani headers as per instructions included in header box. Do not fully tighten flange bolts at this time. 3.) Measure...
View Article2003 4.6L FORD SVT MUSTANG COBRA WITH IRS AFT CAT SYSTEM Removal and...
download Removal and Installation Instructions 1. Remove positive battery connector. 2. Raise vehicle to a comfortable working height. 3. Spray lubricant (WD-40 or similar product) on all rubber...
View Article2005 Ford F-150 Drive Pinion Flange and Drive Pinion Seal Repair Manual
download 1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Section 100-02 . 2. Remove the brake disc. For additional information, refer to Section 206-04 . 3....
View ArticleFORD F450/ 550 SUPER DUTY CHASSIS CABS OWNERS MANUAL
download LATERAL CONTROL ROD AXLE BRACKET INSTALLATION 1. Remove and discard the OEM shock absorbers, but retain the mounting fasteners (bolts & nuts) for re-use. 2. Remove the top d-bushing mount...
View ArticleFORD E450 CUTAWAY OWNERS MANUAL
download DRIVER SIDE DISASSEMBLY 1. With weight taken off the rear springs, as noted in pre-installation checklist, remove the front and rear bolts from the leaf spring. 2. Remove existing U-bolts and...
View Article2006 HONDA CIVIC Rear Brake Pad Inspection and Replacement Manual
download Inspection 1. Raise the rear of the vehicle, and support it with safety stands in the proper locations. 2. Remove the rear wheels. 3. Check the thickness (A) of the inner pad (B) and the...
View Article