2007 HONDA PILOT EXHAUST PIPE FINISHERS INSTALLATION INSTRUCTIONS

download
TOOLS REQUIRED 10 mm Socket Torque wrench Rubber mallet 2 Exhaust pipe finishers 3. While pushing the exhaust pipe finisher firmly against the exhaust pipe, tighten the flange bolt. Torque the flange bolt to 10 N·m (7lbs-ft.). Repeat for the second exhaust pipe finisher. 2. With the flange bolts facing down, slide the exhaust pipe finishers onto the exhaust pipes until they bottom. If necessary, use a rubber mallet to tap the exhaust pipe finishers into place. 4. Start the engine and rev it up a few times. Listen for vibration from the exhaust pipe finishers and adjust if necessary.