2005-2008 4.6L Ford Mustang GT Catalyzed Power-X crossover pipe Installation Manual

download
Installation instructions: 1.) Raise and support vehicle. 2.) Install Bassani headers as per instructions included in header box. Do not fully tighten flange bolts at this time. 3.) Measure and cut 10.5 inches off inlets of intermediate/over-axle pipes. 4.) Remove mufflers from rear of car. This is accomplished by removing fasteners that attach hangers to frame. 5.) Place two supplied clamps over inlets of crossover body and insert catalytic converters into slip-connectors. 6.) Place two supplied clamps over inlets of converters and insert inlet legs into inlets of converters. The inlet leg that has the hanger that is slightly further away from the pipe goes on the passenger side of vehicle. 7.) Place two supplied clamps over inlets of legs and install assembly, in one piece, into vehicle rubber hangers and onto header collectors. 8.) Place two supplied clamps over outlets of crossover and insert shortened intermediate/over-axle pipes into slip- connectors. 9.) Re-install mufflers, align components and tighten all clamps and header flange bolts. 10.) Lower vehicle